Skip to main content

Topic: VirtualDub 1.6.12 released (Read 13970 times) previous topic - next topic

0 Members and 1 Guest are viewing this topic.
  • smok3
  • [*][*][*][*][*]
  • Moderator
VirtualDub 1.6.12 released
Quote
The 1.6 branch is getting closer to stable and as such most of the changes are bug fixes, although a few new features snuck in there.

   * Added vdub.exe launcher for basic command-line driven operation.
   * Added multiple undo/redo for timeline edits.
   * Added /? switch to list command-line options.
   * Added support for reading paletted BMPs.
   * Dub input format is now reported in the log.
   * Script: Added Sylia.Atoi(), Atol(), and Atod() functions to allow
     conversions from string to value.
   * Script: Added VirtualDub.Log(string) command to output to log output
     (or console).


http://virtualdub.sourceforge.net/
  • Last Edit: 06 January, 2006, 08:27:54 AM by CiTay
PANIC: CPU 1: Cache Error (unrecoverable - dcache data) Eframe = 0x90000000208cf3b8
NOTICE - cpu 0 didn't dump TLB, may be hung

  • smok3
  • [*][*][*][*][*]
  • Moderator
VirtualDub 1.6.12 released
Reply #1
dv capturing support seems to be planned as well:
Quote
I wanted to add DV capture support to this release but ran into a critical problem: I have no DV capture devices for development. I do have a Pinnacle DVplus, but I have no drivers for it, the website seems to be specifically made to prevent you from getting any, and even if I had them it's not clear I could capture without a DV camcorder attached. It's basically impossible to diagnose capture problems without the actual hardware. As a result 1.6.5 still does not allow you to capture from a capture device that outputs DV data. Sorry.


edit:
so, you know what to do, send in some firewire cards and equipment to the author
  • Last Edit: 05 April, 2005, 04:53:56 PM by smok3
PANIC: CPU 1: Cache Error (unrecoverable - dcache data) Eframe = 0x90000000208cf3b8
NOTICE - cpu 0 didn't dump TLB, may be hung

  • CiTay
  • [*][*][*][*][*]
  • Administrator
VirtualDub 1.6.12 released
Reply #2
VirtualDub 1.6.8 (stable):

http://virtualdub.sourceforge.net/

Quote
Build 23567 (1.6.8, stable): [July 3, 2005]
   [bugs fixed]
   * Fixed occasional crash if display panes are refreshed while editing the
     filter list.
   * Fixed hang if VirtualDub is the active application and attempts to refresh
     the display panes when a display mode switch occurs.
   * Display panes did not always update properly when seeking if Direct3D mode
     was enabled and updating the frame took a lot of CPU time.
   * Direct3D display mode could be activated if checked even if the option was
     grayed due to DirectX support being disabled.
   * Capture: Fixed crash if capture is attempted with audio enabled but audio
     isn't present or is in an incompatible format.
   * Reversed direction of mouse wheel action to be consistent with Windows.
   * Hex editor's Extract Segment command would sometimes extract the wrong
     segment due to repainting the main pane during the extract.
   * CLI interface app didn't exit if console was empty prior to invocation due
     to overzealous Explorer detection. This is now only done if no arguments
     are supplied.
   * Fixed crash in MPEG-1 parser when encountering a pack with a too-short
     length, such as zero.
   * Audio codec errors sometimes reported the wrong source of the error (i.e.
     decompressor vs. compressor).

   [regressions fixed]
   * Pixel shaders were disabled in Direct3D bicubic mode due to debug code
     mistakenly left in.
   * MRU list sometimes didn't resort properly when reopening a recently opened
     file.

  • smok3
  • [*][*][*][*][*]
  • Moderator
VirtualDub 1.6.12 released
Reply #3
i just noticed that there is now a batch option in f4 window, any ideas from what version is that allready there? (in any case: very cool)
PANIC: CPU 1: Cache Error (unrecoverable - dcache data) Eframe = 0x90000000208cf3b8
NOTICE - cpu 0 didn't dump TLB, may be hung

  • Klyith
  • [*][*][*][*]
  • Members (Donating)
VirtualDub 1.6.12 released
Reply #4
Quote
i just noticed that there is now a batch option in f4 window, any ideas from what version is that allready there? (in any case: very cool)

That's been there for a really long time. At least since 1.4 when I started using it. It's not a difficult feature to program, so I wouldn't be suprised if it's been there since the very first days of the program.

What's new is this secondary exe, the "VirtualDub command-line driver application". I have no idea what it does or how it works. Time to head over to doom9 for some search & read for the next hour or two.

  • smok3
  • [*][*][*][*][*]
  • Moderator
VirtualDub 1.6.12 released
Reply #5
Quote
That's been there for a really long time. At least since 1.4 when I started using it. It's not a difficult feature to program, so I wouldn't be suprised if it's been there since the very first days of the program.
you sure? (i have a certain memory of /me requesting that feature on virtualdub forums)

Quote
What's new is this secondary exe, the "VirtualDub command-line driver application". I have no idea what it does or how it works. Time to head over to doom9 for some search & read for the next hour or two.
no idea, i cant find any guides on that either.
PANIC: CPU 1: Cache Error (unrecoverable - dcache data) Eframe = 0x90000000208cf3b8
NOTICE - cpu 0 didn't dump TLB, may be hung

  • CiTay
  • [*][*][*][*][*]
  • Administrator
VirtualDub 1.6.12 released
Reply #6
1.6.9 stable: http://virtualdub.sourceforge.net/

Quote
Build 23604 (1.6.9, stable): [July 10, 2005]
   [bugs fixed]
   * Extended workaround for Huffyuv joining problems to capture mode
     (pre-zeroing format block).
   * Hex editor would warp to a random location when using the mouse wheel for
     the first time.
   * Currently displayed frame was not updated after a reload (F2).
   * Fixed errors when opening YCbCr (YUV) videos that had nonstandard bit
     depth or image size values in the frame header.
   * YV16 input is now supported; previously it could be written but not
     re-read.

   [regressions fixed]
   * Fixed sporadic audio compression errors at end of render.

  • CiTay
  • [*][*][*][*][*]
  • Administrator
VirtualDub 1.6.12 released
Reply #7
1.6.11 stable: http://virtualdub.sourceforge.net/

Quote
Build 23774 (1.6.11, stable): [October 2, 2005]
   [features fixed]
   * Added support for using D3D .fx files for hardware-assisted display. This
     requires d3dx_25.dll (DirectX 9.0c April 2005) to work.
   * Added keyboard shortcuts for scene forward/backward.

   [bugs fixed]
   * The current frame could not be copied after a "scan for errors" command.
   * Fixed crash in DV type-1 audio resampling code at end of stream.
   * Fixed audio read errors on DV type-1 files with drop frames.
   * Fixed a couple of crash bugs related to using positive audio displacements.
   * Fixed a rare filter crash triggered by a previously failing filter suddenly
     becoming able to start while the filter list is being edited.
   * Fixed bad write length in .wav writer.
   * If precision was set to "no change" but channel conversion was enabled, the
     audio was converted to 8-bit.
   * Error descriptions for failed jobs were often truncated after exiting and
     restarting the app.
   * JPEG decoder sometimes reported false parsing errors due to not parsing
     over comment blocks.
   * Filter load and AVI append functions could report "operation completed
     successfully" rather than the proper error.
   * AVI File Information reported an incorrect preload value for AVIs that
     started with a video chunk.
   * Capture: Stop conditions were being saved even if Accept was pressed.
   * Capture: Emulation test driver crashed on activation if the last used video
     file couldn't be found.
   * (AMD64 only) Disassembler was not decoding base registers properly.
   * (AMD64 only) Cropping was incorrect or outright broken with some video
     filters.

   [regressions fixed]
   * "Split" audio filter was broken.
   * Frameserver exposed too much audio when range to be served was set through
     range selection, rather than the tail being deleted.

  • CiTay
  • [*][*][*][*][*]
  • Administrator
VirtualDub 1.6.12 released
Reply #8
1.6.12 stable: http://virtualdub.sourceforge.net/


Quote
   [features added]
   * Performance settings are now auto-saved.
   * Cropping dialogs now auto-scale video that is too large to display and
     use a dashed crop border for better visibility.
   * Added /cmd flag to quickly invoke a script command from the command-
     line.
   * There is now an option to avoid tearing in the video display panes.
   * Script: Added VirtualDub.Exit(int) command to end the program with a
     specific error code.
   * Script: Added VirtualDub.subset.length property for current length of
     subset in frames (timeline).
   * Script: Added VirtualDub.video.length property for current length of
     source video in frames.
   * Capture: The list of statistics displayed in the info panel has been
     expanded and can be filtered from the Preferences dialog.
   * Capture: Modified option to adjust video timing based on drift from
     ideal stream timing rather than real-time.
   * Capture: Reworked video timing interpolation to be less sensitive to
     discontinuities in the system timer.
   * Capture: "Autoincrement filename" option now automatically skips over
     existing files as well.
   * Capture: Added timing graph to visualize behavior of resync engine.
   * Capture: Timing logs, if enabled, are automatically saved at the end of
     capture.
   * Capture: Increased precision of frame period selection from 1us to 100ns
     to reduce frame dropping at device level when using DirectShow drivers.
   * Capture: Capture from DV sources to type-2 DV AVI using the DirectShow
     DV driver is now supported.
   * Capture: Backspace now works when entering channel numbers.

   [bugs fixed]
   * Increased precision of processing fps estimate.
   * "Space" is no longer listed as an accelerator for "abort dub" since it
     doesn't work as such when rendering to disk. It still works for preview.
   * Fixed job control re-enabling itself if a menu command is chosen while a
     job is running, leading to possible reentrancy crashes.
   * Clearing the current job list or loading a new one while a job was in
     progress led to a crash.
   * Invalid MPEG-1 layer II frame headers display a slightly less confusing
     error than "internal error."
   * Renamed "use internal MJPEG decoder" in AVI extended open options to
     "use internal decoders," since it happened to force the internal DV
     decoder too. Added a sticky option in Preferences for this.
   * Filters were receiving inconsistent output frame numbers when using
     input preview or saving with a starting offset.
   * Fixed crash when crop rectangle reduced filter input to smaller than 1x1.
   * Fixed crash when using deinterlace filter in "duplicate field 2" mode.
   * Fixed broken cropping in some modes of deinterlace filter.
   * Manually stopping a save operation will now also stop a running script,
     and cause a command-line task to return with an error code.
   * CLI tool didn't work properly when path to vdub.exe/vdub64.exe contained
     spaces.
   * Removed some hard-coded limits on frame rates in the Frame Rate dialog
     box.
   * Fixed minor memory leak when plugins fail to load.
   * Fixed a case where an I/O error on the output AVI file could cause a hang
     instead of an error to be displayed.
   * MPEG-1: Fixed yet another rare frame decoding error when seeking randomly
     in the timeline.
   * MPEG-1: Fixed crash when opening file with all CPU optimizations forced on.
   * D3DFX: vd_tvpcorrect, vd_t2vpcorrect, vd_tvpcorrect2, and vd_t2vpcorrect2
     constants were computed with U and V sizes swapped.
   * Capture: VFW devices sometimes didn't display overlay properly with full-
     height frame sizes and consumed additional CPU due to the preview hook
     being left enabled.
   * Capture: The Video File (emulation) test capture driver is no longer a
     candidate for being saved as the driver to auto-start the next time
     capture mode is entered.
   * Capture: Unicode filenames are now displayed properly in the title bar.
   * Capture: Fixed 0.03% sync error when using NTSC frame rates.
   * Capture: Fixed random crash when modifying filter parameters with a WDM
     capture driver active in accelerated preview mode.
   * Capture: Fixed keyboard focus on startup so that entering channel numbers
     works again.
   * Capture: Fixed instability on reporting errors when audio resampler is
     enabled.
   * (AMD64 only) Fixed crash when opening a Motion JPEG file with no MJPEG
     codec installed. Note that the internal MJPEG codec still isn't
     implemented for this platform.

   [regressions fixed]
   * Capture: Fixed normal errors sometimes being reported as internal errors.
  • Last Edit: 05 January, 2006, 11:55:53 AM by CiTay

  • stephanV
  • [*][*][*][*]
VirtualDub 1.6.12 released
Reply #9
Build is experimental, not stable.
"We cannot win against obsession. They care, we don't. They win."

  • CiTay
  • [*][*][*][*][*]
  • Administrator
VirtualDub 1.6.12 released
Reply #10
Quote
Build is experimental, not stable.
[{POST_SNAPBACK}][/a]


I'm only quoting [a href="http://virtualdub.sourceforge.net/]http://virtualdub.sourceforge.net/[/url]

Release build -- 1.6.12 (stable), 32-bit version

  • stephanV
  • [*][*][*][*]
VirtualDub 1.6.12 released
Reply #11
If you look at the "Current Version" box in the top left corner of that page, it says

Code: [Select]
Current version

v1.6.11 (stable)
v1.6.12 (experimental)


First paragraph of the Blog entry is perhaps more explanatory.
"We cannot win against obsession. They care, we don't. They win."