Skip to main content

Notice

If you are using a Hotmail or Outlook email address, please change it now, as Microsoft is rejecting all email from our service outright.
Topic: UPnP MediaRenderer output | discussion (Read 156845 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Re: UPnP MediaRenderer output | discussion

Reply #450
I use Foobar Recorder component together with VB-Audio Hi-Fi Cable.

Cheers

Re: UPnP MediaRenderer output | discussion

Reply #451
I managed this Plugin to work with DLNA to my AV-Receiver. But the info it shows on it's display is just "Foorbar2000 audio stream". Is it possible to change this to song information as they are displayed in foobar?

Re: UPnP MediaRenderer output | discussion

Reply #452
Hi to all,
I'm trying to stream audio from fb2k on pc to Denon avr-x2600h using foo_out_upnp, but the receiver gives a massage "Unable to play media. Please try again later."
Also, what configuration must be for streaming 24bit/192kHz?

here are my configs in fb2k:
device details
Friendly name : Denon AVR-X2600H
IP address : 192.168.0.143
Manufacturer : Denon
Manufacturer URL : http://www.denon.com
Model : Denon AVR-X2600H
Model number : Aios 4.025

Supported formats:
http-get:*:audio/mpeg:*
http-get:*:audio/vnd.dlna.adts:*
http-get:*:audio/x-ms-wma:*
http-get:*:audio/x-ms-wma:*
http-get:*:audio/L16;rate=48000;channels=2:*
http-get:*:audio/L16;rate=48000;channels=1:*
http-get:*:audio/L16;rate=44100;channels=2:*
http-get:*:audio/L16;rate=44100;channels=1:*
http-get:*:audio/wav:*
http-get:*:audio/mp3:*
http-get:*:audio/flac:*
http-get:*:audio/aac:*
http-get:*:audio/m4a:*
---------------------------------------------------------------
upnp output config:
# defaults that apply to every device
stream-title=foobar2000 audio stream
# default preferred format, can be overridden per-device; available are: FLAC, WAV, LPCM
# default to FLAC where supported
preferred-format=FLAC
# Various devices fail to pause on what they assume to be a live stream, require a stop command
# Can be overridden to true for specific devices
supports-pause=true
# Default to FLAC not supported even if the device claims otherwise
# Many report that they support FLAC yet fail to play an infinite length FLAC stream
supports-FLAC=false

manufacturer=Denon
model= Denon AVR-X2600H
supports-FLAC=true
preferred-format=FLAC

Re: UPnP MediaRenderer output | discussion

Reply #453
Have you tried default upnp output config without any specific configuration for your receiver?

Re: UPnP MediaRenderer output | discussion

Reply #454
Yes. first i did all with default settings and after went through the topic trying to configure and make changes people were doing with their devices. No luck so far, and the message is same always regardless any changes.

here my components, maybe some are odd in my case
Core (2020-06-29 11:49:42 UTC)
    foobar2000 core 1.5.5
foo_albumlist.dll (2020-06-29 11:49:14 UTC)
    Album List 4.7
foo_cdda.dll (2020-06-29 11:48:58 UTC)
    CD Audio Decoder 1.5.5
foo_converter.dll (2020-06-29 11:49:06 UTC)
    Converter 1.5.5
foo_dsp_eq.dll (2020-06-29 11:49:00 UTC)
    Equalizer 1.2.2
foo_dsp_std.dll (2020-06-29 11:48:56 UTC)
    Standard DSP Array 1.5.5
foo_fileops.dll (2020-06-29 11:48:58 UTC)
    File Operations 1.5.5
foo_freedb2.dll (2020-06-29 11:48:58 UTC)
    Online Tagger 0.7
foo_input_std.dll (2020-06-29 11:49:32 UTC)
    FFmpeg Decoders 3.4.6-0ac9001
    Standard Input Array 1.5.5
foo_out_asio.dll (2016-01-03 10:40:20 UTC)
    ASIO support 2.1.2
foo_out_upnp.dll (2020-07-24 13:12:04 UTC)
    UPnP MediaRenderer Output 1.3.2
foo_out_wasapi.dll (2017-06-19 22:32:30 UTC)
    WASAPI output support 3.3
foo_rgscan.dll (2020-06-29 11:49:10 UTC)
    ReplayGain Scanner 1.5.5
foo_ui_columns.dll (2011-02-27 20:22:58 UTC)
    Columns UI 0.3.8.8
foo_ui_std.dll (2020-06-29 11:49:18 UTC)
    Default User Interface 1.5.5
foo_unpack.dll (2020-06-29 11:49:06 UTC)
    ZIP/GZIP/RAR Reader 1.8
foo_upnp.dll (2020-07-24 12:52:14 UTC)
    UPnP/DLNA Renderer, Server, Control Point 0.99.49

Re: UPnP MediaRenderer output | discussion

Reply #455
Hello,
I am using SONY SRS-ZR7 wireless speaker.
I can use WMP to cast to that device, but cannot use this component to output.
The setting of component is in default.
FB2K 1.6 and component 1.3.2

Quote
Opening track for playback: "D:\Music\[200805] 5thアルバム「STRAY SHEEP」/米津玄師 (Hi-Res)\002-Flamingo.flac"
[UPnP] Opening device:
[UPnP] manufacturer=Sony Corporation
[UPnP] model=SRS-ZR7
[UPnP] name=SRS-ZR7 349B02
[UPnP] Stream format: 24-bit 48000Hz 2ch
[UPnP] Device protocol info:
[UPnP] http-get:*:audio/L16:DLNA.ORG_PN=LPCM;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/mpeg:DLNA.ORG_PN=MP3;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/mpeg:DLNA.ORG_PN=MP3X;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMABASE;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMAFULL;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS_192;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS_320;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/mp4:DLNA.ORG_PN=AAC_ISO;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/3gpp:DLNA.ORG_PN=AAC_ISO;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/mp4:DLNA.ORG_PN=AAC_ISO_192;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/3gpp:DLNA.ORG_PN=AAC_ISO_192;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/mp4:DLNA.ORG_PN=AAC_ISO_320;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/3gpp:DLNA.ORG_PN=AAC_ISO_320;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/vnd.dlna.adts:DLNA.ORG_PN=HEAAC_L2_ADTS;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/mp4:DLNA.ORG_PN=HEAAC_L2_ISO;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/3gpp:DLNA.ORG_PN=HEAAC_L2_ISO;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/vnd.dlna.adts:DLNA.ORG_PN=HEAAC_L2_ADTS_320;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/mp4:DLNA.ORG_PN=HEAAC_L2_ISO_320;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/3gpp:DLNA.ORG_PN=HEAAC_L2_ISO_320;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/mp4:DLNA.ORG_PN=HEAAC_L2_ISO_128;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/3gpp:DLNA.ORG_PN=HEAAC_L2_ISO_128;DLNA.ORG_FLAGS=9d300000000000000000000000000000,http-get:*:audio/mpeg:*,http-get:*:audio/L16:*,http-get:*:audio/wav:*,http-get:*:audio/x-wav:*,http-get:*:audio/x-ms-wma:*,http-get:*:audio/mp4:*,http-get:*:audio/3gpp:*,http-get:*:audio/vnd.dlna.adts:*,http-get:*:audio/flac:*,http-get:*:audio/x-flac:*,http-get:*:audio/aiff:*,http-get:*:audio/x-aiff:*,http-get:*:audio/aif:*,http-get:*:audio/x-aif:*,http-get:*:audio/m4a:*,http-get:*:audio/x-m4a:*,http-get:*:audio/x-alac:*,http-get:*:audio/x-monkeys-audio:*,http-get:*:audio/ape:*,http-get:*:audio/x-ape:*,http-get:*:audio/dsd:*,http-get:*:audio/x-dsd:*
[UPnP] Listening on: 192.168.1.76
[UPnP] Stream address: http://192.168.1.76:61261/4/stream.wav
[UPnP] Returned time: 0:00:00
[UPnP] Transport state: NO_MEDIA_PRESENT
[UPnP] Returned time: 0:00:00
[UPnP] Transport state: NO_MEDIA_PRESENT
[UPnP] SetAVTransportURI failure: Action SetAVTransportURI failed
[UPnP] == LAST REPLY XML ==
[UPnP] <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><s:Fault><faultcode>s:Client</faultcode><faultstring>UPnPError</faultstring><detail><UPnPError xmlns="urn:schemas-upnp-org:control-1-0"><errorCode>716</errorCode><errorDescription>Action SetAVTransportURI failed
</errorDescription></UPnPError></detail></s:Fault></s:Body></s:Envelope>
[UPnP] == XML END ==
Unrecoverable playback error: Action SetAVTransportURI failed
[UPnP] Detached transport op failure: Action Stop failed
[UPnP] == LAST REPLY XML ==
[UPnP] <?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><s:Fault><faultcode>s:Client</faultcode><faultstring>UPnPError</faultstring><detail><UPnPError xmlns="urn:schemas-upnp-org:control-1-0"><errorCode>701</errorCode><errorDescription>Action Stop failed
</errorDescription></UPnPError></detail></s:Fault></s:Body></s:Envelope>
[UPnP] == XML END ==

Re: UPnP MediaRenderer output | discussion

Reply #456
I managed this Plugin to work with DLNA to my AV-Receiver. But the info it shows on it's display is just "Foorbar2000 audio stream". Is it possible to change this to song information as they are displayed in foobar?

Did you ever find out anymore on this? The functionality of this app allowing you to select DLNA devices from the actual outputs in foobar is much better than the other DLNA plug-in, but i really want to have at least, ARTIST - SONG..

Re: UPnP MediaRenderer output | discussion

Reply #457
This component has solved alot of issues for me being able to play music from my laptop over my Yamaha receivers. For the most part, it works really well and correctly discovers my receivers in my home ethernet network. The only thing I would like to see if more development. I messaged the author and asked if he didn't want to develop it anymore, if he would release the source code so one of you clever programmers could keep it going. Unfortunately I never got a reply. I would love to see the tag information show up on the device playing the music as an example. I tried playing around with the INI/CFG file but was never able to make any progress. I know it is a long shot. (I did try the other UPnP component also).

 

Re: UPnP MediaRenderer output | discussion

Reply #458
Hi,
I have installed this plugin in hope that I will be able to play music directly from my laptop.
Unfortunately I cant hear anything on my Denon AVR-X2400H. When I try to play anything on Foobar it stops.

My configuration :
# defaults that apply to every device
stream-title=foobar2000 audio stream
# default preferred format, can be overridden per-device; available are: FLAC, WAV, LPCM
# default to FLAC where supported
preferred-format=FLAC
# Various devices fail to pause on what they assume to be a live stream, require a stop command
# Can be overridden to true for specific devices
supports-pause=true
# Default to FLAC not supported even if the device claims otherwise
# Many report that they support FLAC yet fail to play an infinite length FLAC stream
supports-FLAC=false

manufacturer=Denon
model= Denon AVR-X2400H
supports-FLAC=true
preferred-format=FLAC

Device info:
Friendly name : Denon AVR-X2400H
IP address : 192.168.1.251
Manufacturer : Denon
Manufacturer URL : http://www.denon.com
Model : Denon AVR-X2400H
Model number : Aios 4.025

Supported formats:
http-get:*:audio/mpeg:*
http-get:*:audio/vnd.dlna.adts:*
http-get:*:audio/x-ms-wma:*
http-get:*:audio/x-ms-wma:*
http-get:*:audio/L16;rate=48000;channels=2:*
http-get:*:audio/L16;rate=48000;channels=1:*
http-get:*:audio/L16;rate=44100;channels=2:*
http-get:*:audio/L16;rate=44100;channels=1:*
http-get:*:audio/wav:*
http-get:*:audio/mp3:*
http-get:*:audio/flac:*
http-get:*:audio/aac:*
http-get:*:audio/m4a:*

I've tried all formats and it doesn't work on anything. Just doesn't want to play. I can only control volume via Foobar.
I have tried "Stream What You Hear" program and it doesn't play a sound also.
Both programs Foobar and Stream What You Hear detects my AVR but give no sound.
I have also tried windows media player and option "render to device" works fine and I can hear sound but cant change volume and it always stops after one song.
What is wrong ?

 
SimplePortal 1.0.0 RC1 © 2008-2020