Skip to main content

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: Converting FLAC to Opus. 160 or 192kbps for universal transparency? (Read 927 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Converting FLAC to Opus. 160 or 192kbps for universal transparency?

So I think I've read most of the information available regarding people's opinions (here and elsewhere on the internet) going back as far as probably 2011 to today. From what I've read Opus has improved over time, in the sense that 128kbps and higher were relatively easy to spot as not transparent when only earlier versions of Opus were available, but for some number of years even lower bitrates have been considered transparent to many people for most music. So far I'm thinking maybe 160kbps is enough to ensure universal transparency across all music (perhaps some "killer samples" excluded), but before I start converting my FLACs, I wanted to make sure there's no advantage to converting to 192kbps in Opus (or perhaps even higher).

This is one of the main links I've used to help decide on this range (160 to 192kbps) for converting my files: https://wiki.hydrogenaud.io/index.php?title=Opus#Music_encoding_quality

I've mainly written this post because I want to get an up-to-date set of opinions from people. I've read more than once certain people's opinion that you should just use 192kbps to ensure optimal quality under all conditions. I'm not really worried about what is likely a minor space saving difference between 160 or 192kbps, so if it might be worth it from an audio quality perspective to use 192kbps, even if it's only worth it in rare cases, I might go with that just to be on the safe side.

Let me know what you think, thanks.

Re: Converting FLAC to Opus. 160 or 192kbps for universal transparency?

Reply #1
Funny that I also convert my large library and I arrived at the decision that I convert music I regard poorly mastered / poor quality at 160 kbs (I am talking of original CD-s but many had poor engineers. Approx 50% of my collection. Just today I listened to 2 Manic Street Preachers albums and they sound very poor). I want to have a piece of mind, but I cringe hence 160 kbp. I would want 128 kbp, but I thought some must be so bad that I have to throw some bits to help the encoder. Totally unfounded but there you go.

Good CD-s that sound crisp and clear and undistoried (mostly end up Jazz and classical, and good vocals) I decided to convert at 192kbs. Just want the extra safety.

I do not see the point going above that based on the feedbacks and listening tests on the forum.

Re: Converting FLAC to Opus. 160 or 192kbps for universal transparency?

Reply #2
So far I'm thinking maybe 160kbps is enough to ensure universal transparency across all music (perhaps some "killer samples" excluded),
In my opinion it is 100% correct.

Quote
I'm not really worried about what is likely a minor space saving difference between 160 or 192kbps, so if it might be worth it from an audio quality perspective to use 192kbps, even if it's only worth it in rare cases, I might go with that just to be on the safe side.
Be careful, here is exactly where begins the slippery slope. There is an inflationary pressure at the exact moment you want to replace lossless by lossy and ask to avoid all possible risk of hearing slight artifacts on exceptional case, or minor differences under extreme listening conditions. 160 kbps is fine but 192 mathematically reduces the risk. But what about using 220 kbps to reduce further the risk: it's only 15% bigger? Finally, doesn't 256 kbps provide a better safety margin? Oh wait, I found a topic and someone was able to ABX one sample at 256 kbps: shit, I now really think it's better to maintain at least 320 kbps. But now I'm not even sure to use perceptual lossy encoder anymore. So my question is: WavPack lossy or LossyFLAC? And in this case, I see many people recommanding to go up to 380 kbps if not more.
At the end, you stay with your FLAC library untouched.

You want to make a smart use of modern lossy encoders like OPUS? 160 kbps is really fine. It's not absolutely perfect but nothing is (it's the exact meaning of lossy). You'll save a lot of space and I doubt you'll regret it.

Re: Converting FLAC to Opus. 160 or 192kbps for universal transparency?

Reply #3
I use 256 kbps and resampling with SoX DSP.

Re: Converting FLAC to Opus. 160 or 192kbps for universal transparency?

Reply #4
Unless your collection is truly gargantuan it shouldn't take that long to batch convert your entire library as needed. At worst maybe leaving it running overnight on a modern CPU?

In this circumstance I just choose the highest bitrate that will fit the whole collection on whatever disk the opus is going on, with a little extra room to add more later.

If you are not storage space constrained than there is no reason not to just use your flacs. If you are storage space constrained then that constraint makes the bitrate decision for you.

I use 120kbps as it lets me fit my whole library on the 64GB sd card in my phone. If I'm listening using my phone it's almost certainly in a noisy environment anyway... and going over APTX bluetooth... even 120kbps is overkill.

Re: Converting FLAC to Opus. 160 or 192kbps for universal transparency?

Reply #5
Given what the OP said, 192kbps is likely what you want to use given this listening test from Oct 2020 from IgorC as every single sample he tested was a perfect 5.00... https://hydrogenaud.io/index.php?topic=120007.0

because for someone who's concerned with getting peak sound quality with Opus, but without pegging the bitrate ridiculously high and defeating the purpose of using a lossy format in the first place, 192kbps seems to be what you probably want.

so between 160kbps vs 192kbps on Opus... I think you sort of answered your own question as if your concerned with perfection then 192kbps is the safer option even though 160kbps is probably minimally worse and is a bit more efficient.

with that said... I am of the mindset if someone is going to use any higher than 96kbps or 128kbps you might as well just jump to 192kbps range and forget about it as it seems like once people are in this 192kbps range or so, it does not really matter which lossy format you choose as they are all close enough to each other overall. hell, even MP3 (i.e. LAME V2 (190kbps average)), as shown in IgorC's test from Oct 2020, gives high quality sound overall lacking 'maybe' a couple of samples or so.

p.s. but in the real world... 96kbps or 128kbps (especially with Opus) is probably more than enough for most people, if not the vast majority of people when just sitting back and listening to their music straight up. or if someone is THAT concerned with perfection, you might as well switch to a lossless format (i.e. FLAC etc) since the whole point of lossy audio is to get the smallest file size while maintaining a high enough level of sound quality and in this regard it's hard to go wrong with Opus @ 96kbps or 128kbps. hell, even 64kbps is a viable option for many people since it's in the ball park of MP3 @ LAME V5 (130kbps average) which is good enough for many people.
For music I suggest (using Foobar2000)...
1)Opus @ 64kbps or 96kbps.
2)AAC (Apple or FhG(Winamp)) @ 96kbps.
3)MP3 (LAME) @ V5 (130kbps). NOTE: I am using MP3(V5) on AGPTEK-U3(8GB) as of Mar 18th 2021. I use 'fatsort' (on Linux) so MP3's are listed in proper order on AGPTEK-U3.

Re: Converting FLAC to Opus. 160 or 192kbps for universal transparency?

Reply #6
So far I'm thinking maybe 160kbps is enough to ensure universal transparency across all music (perhaps some "killer samples" excluded),
In my opinion it is 100% correct.


Is this also relevant when using bluetooth device such as headphones/speakers or is better to use higher bitrate source which is better at transcoding when using bluetooth device?
As I understand, no matter which format/codec is used, transcoding to bluetooth codec always occur.
WavPack v5.4 -b450hh

Re: Converting FLAC to Opus. 160 or 192kbps for universal transparency?

Reply #7
Given what the OP said, 192kbps is likely what you want to use given this listening test from Oct 2020 from IgorC as every single sample he tested was a perfect 5.00... https://hydrogenaud.io/index.php?topic=120007.0

because for someone who's concerned with getting peak sound quality with Opus, but without pegging the bitrate ridiculously high and defeating the purpose of using a lossy format in the first place, 192kbps seems to be what you probably want.

so between 160kbps vs 192kbps on Opus... I think you sort of answered your own question as if your concerned with perfection then 192kbps is the safer option even though 160kbps is probably minimally worse and is a bit more efficient.

with that said... I am of the mindset if someone is going to use any higher than 96kbps or 128kbps you might as well just jump to 192kbps range and forget about it as it seems like once people are in this 192kbps range or so, it does not really matter which lossy format you choose as they are all close enough to each other overall. hell, even MP3 (i.e. LAME V2 (190kbps average)), as shown in IgorC's test from Oct 2020, gives high quality sound overall lacking 'maybe' a couple of samples or so.

p.s. but in the real world... 96kbps or 128kbps (especially with Opus) is probably more than enough for most people, if not the vast majority of people when just sitting back and listening to their music straight up. or if someone is THAT concerned with perfection, you might as well switch to a lossless format (i.e. FLAC etc) since the whole point of lossy audio is to get the smallest file size while maintaining a high enough level of sound quality and in this regard it's hard to go wrong with Opus @ 96kbps or 128kbps. hell, even 64kbps is a viable option for many people since it's in the ball park of MP3 @ LAME V5 (130kbps average) which is good enough for many people.

160kbps would be my upper limit for any post MP3 codec, Any higher like 192 ~ 320kbps may as well use Lossless codec. Outside of few hard samples on MP3, LAME V5 ~ V4 still hold up very well for many people.
Got locked out on a password i didn't remember. :/

 
SimplePortal 1.0.0 RC1 © 2008-2021