Skip to main content ↑ ↓

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: Anyone familiar with GAPs (EAC?) (Read 2089 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Anyone familiar with GAPs (EAC?)

Sorry I can't find the appropriate section for this so sorry if it is the wrong place.


I am being  asked to make a rip on EAC but with a CD which has variable gaps. I don't know what this means and need peoples help in understanding what it is they mean?

They're not willing to help me in any way explain it.

Is it something to do with configuring the EAC Detection Method and knowing the right one to use?

If so how would I go about knowing the right one to use?

Thanks.

Re: Anyone familiar with GAPs (EAC?)

Reply #3 –
)

Select Detection Method A and gap the disc 3 times. Write down the resulting gaps on each pass and compare them. In all 3 passes the gaps must be identical!! If they are not select Detection Method B and do the same thing, if all 3 passes are not identical try Detection Method C. Whichever method results in 3 passes with identical gaps is the method you should use.

Re: Anyone familiar with GAPs (EAC?)

Reply #4 –
Quote from: SimonH76 on
)

Select Detection Method A and gap the disc 3 times. Write down the resulting gaps on each pass and compare them. In all 3 passes the gaps must be identical!! If they are not select Detection Method B and do the same thing, if all 3 passes are not identical try Detection Method C. Whichever method results in 3 passes with identical gaps is the method you should use.




This was the exact thing written but i dont know how to do it

Re: Anyone familiar with GAPs (EAC?)

Reply #5 –
Quote from: SimonH76 on
i dont know how to do it
You don't know how to do what? Change detection method? Detect gaps? Write down results?