Skip to main content


Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: [DOUBLE-POSTING (TOS #6)] From: R128GAIN: An EBU R128 compliant loudne (Read 1415 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

[DOUBLE-POSTING (TOS #6)] From: R128GAIN: An EBU R128 compliant loudne

There are only two algorithms: (classical) ReplayGain and ITU BS.1770.

You're right.
I also watched this short clarification:
Florian Camerer (2012) ITU BS.1770-2 Gating Scheme,

So could I now try to wrap-up by stating the following:

(1.1) PROGRAMME LOUDNESS = single value to indicate integrated loudness for duration of the programme (track / album)

[blockquote]Two options:
(1.1.1) Classic Replaygain algorithm (2001).
(1.2.1) ITU BS. 1770 algorithm. Including gating function when signal drops below a certain point, specified as of revision ITU-R BS.1770-2 (03/2011). Latest: ITU-R BS.1770-3 (08/2012).[/blockquote]
[blockquote](1.2.1) EBU-128 specified as difference between low and high percentiles of distribution of loudness as measured with ITU BS. 1770 algorithm including gating[/blockquote]

Loudness leveling of programmes/music compliant to:
[blockquote](2.1) EBU-R128 norm, using -23 LUFS as target level.
(2.2) Classic ReplayGain 1.0 spec, reference -89 dBFS. Only applicable if (1.1.1) was used.
(2.3) ReplayGain 2.0 spec ("RG2"), mapping Loudness (L) metered with (1.2.1) onto dB's using empirical formula: RG2gain = -18 - L
(2.4) ATSC-A/85, using -24 LUFS[/blockquote]

SimplePortal 1.0.0 RC1 © 2008-2021