Skip to main content
Topic: UPnP MediaRenderer output | discussion (Read 104205 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Re: UPnP MediaRenderer output | discussion

Reply #175
Hello

I'm very satisfied by the plugin and use it for months now.My media renderer is a Denon DRA 100 and it works perfectly

Is there a way to have the stream title to display dynamic information like %title% or %artist% or both ?

In the panel of parameters, only a static value seems to be valid

Thanks in advance for your help.

Great plugin

Re: UPnP MediaRenderer output | discussion

Reply #176
visualizations don't work when this output plugin is selected?

I thought they use data before it reaches the output renderer.

Came here to report this. Any workarounds?
Thanks!

Re: UPnP MediaRenderer output | discussion

Reply #177
The problem is, visualizations require somewhat precise latency information. UPnP renderers don't really report this information, so visualizations would be horribly imprecise, possibly way ahead of what you actually hear.

Re: UPnP MediaRenderer output | discussion

Reply #178
Hello

I'm very satisfied by the plugin and use it for months now.My media renderer is a Denon DRA 100 and it works perfectly

Is there a way to have the stream title to display dynamic information like %title% or %artist% or both ?

In the panel of parameters, only a static value seems to be valid

Thanks in advance for your help.

Great plugin

Hello,

Any possibility to have and answer to this question or an evolution made to the component ?

Thanks in advance

Re: UPnP MediaRenderer output | discussion

Reply #179
Hello

I'm very satisfied by the plugin and use it for months now.My media renderer is a Denon DRA 100 and it works perfectly

Is there a way to have the stream title to display dynamic information like %title% or %artist% or both ?

In the panel of parameters, only a static value seems to be valid

Thanks in advance for your help.

Great plugin

Hello,

Any possibility to have and answer to this question or an evolution made to the component ?

Thanks in advance

Hi,

Anyone hoping a new version of this component ?
Requested functionnality : to have the stream title to display dynamic information like %title% or %artist% or both ?

Thanks in advance

Re: UPnP MediaRenderer output | discussion

Reply #180
New version posted. Issues with specific devices have been addressed.

No title display yet. I'll investigate the possibility of doing so for a future update, but I'm not sure if this can be done at all without adverse side effects such as introducing gaps between tracks.

@saulgoodman
An attempted fix for Arcam incompatibility has been added - please enable the ssdp:all option in advanced preferences and see if it helps - as the Arcam device is clearly not responding to our searches for MediaRenderer devices. If this doesn't help, I'll try to come up with another workaround.

Re: UPnP MediaRenderer output | discussion

Reply #181
Hi Peter,
I have been a new foobar2000 user for 6 months now, great software; (I switched from MediaMonkey). I use foobar2000 as PC audio server, serving audio to a Yamaha RN602 player (also a great product). Works well. YES I would be delighted also if UPnP Output plugin can dispatch the usual title formating like "$if2(%title%-%artist%,foobar2000 stream)". If you decide to study it, may be have a look also at returning also the selected audio artwork (embedded/separated) to any device linked to the UPnP playing device;
I explain the situation case: PC foobar2000 to UPnP playing device (Yamaha), and smartphone connected app (MusicCast app) showing updated track (title + artwork) would be ideal... thanks for the excellent work already achieved.

Re: UPnP MediaRenderer output | discussion

Reply #182
New version posted. Issues with specific devices have been addressed.

No title display yet. I'll investigate the possibility of doing so for a future update, but I'm not sure if this can be done at all without adverse side effects such as introducing gaps between tracks.

@saulgoodman
An attempted fix for Arcam incompatibility has been added - please enable the ssdp:all option in advanced preferences and see if it helps - as the Arcam device is clearly not responding to our searches for MediaRenderer devices. If this doesn't help, I'll try to come up with another workaround.
Peter,
Many thanks to have restarted the development.
Hope there will be no side effect. Worth a try from my point of view
Impatient to have the hapiness to download another new version
Many thanks for all your effort
Best regards

Re: UPnP MediaRenderer output | discussion

Reply #183
New version posted. Issues with specific devices have been addressed.

No title display yet. I'll investigate the possibility of doing so for a future update, but I'm not sure if this can be done at all without adverse side effects such as introducing gaps between tracks.

@saulgoodman
An attempted fix for Arcam incompatibility has been added - please enable the ssdp:all option in advanced preferences and see if it helps - as the Arcam device is clearly not responding to our searches for MediaRenderer devices. If this doesn't help, I'll try to come up with another workaround.
Peter,
Many thanks to have restarted the development.
Hope there will be no side effect. Worth a try from my point of view
Impatient to have the hapiness to download another new version
Many thanks for all your effort
Best regards


Peter

"so far so good" with the lastest version downloaded a few days back and installed

My DLNA renderer is a DENON DRA 100

I waitng impateintly for the title display

Thanks in advance for your progress on this functionnality

Best regards


Re: UPnP MediaRenderer output | discussion

Reply #184
Hi,
I have tried out UPnP MediaRenderer output and I'm really impressed. So far, it works perfect except playing dsf-files. Needless to say, that I have installed Super Audio CD Decoder.
When I choose in preferences > SACD > output mode: DSD and start playing, the seekbar button starts, but there is no output. UPnP Renderer is a Bricasti M1, which is displayed in output as DSD : UPnP : M1 an which is able to playback DSD, which is done wit DoP. If I choose in preferences > SACD > output mode: PCM, it works. But I dont want a DSD to PCM conversion, as DoP is true DSD. Will output mode: DSD be supported in the future?

Martin

Re: UPnP MediaRenderer output | discussion

Reply #185
New version posted. Issues with specific devices have been addressed.

No title display yet. I'll investigate the possibility of doing so for a future update, but I'm not sure if this can be done at all without adverse side effects such as introducing gaps between tracks.

@saulgoodman
An attempted fix for Arcam incompatibility has been added - please enable the ssdp:all option in advanced preferences and see if it helps - as the Arcam device is clearly not responding to our searches for MediaRenderer devices. If this doesn't help, I'll try to come up with another workaround.
Peter,
Many thanks to have restarted the development.
Hope there will be no side effect. Worth a try from my point of view
Impatient to have the hapiness to download another new version
Many thanks for all your effort
Best regards


Peter

"so far so good" with the lastest version downloaded a few days back and installed

My DLNA renderer is a DENON DRA 100

I waitng impateintly for the title display

Thanks in advance for your progress on this functionnality

Best regards



Hello

When can we expect news on the dynamic title display version ?

Thanks in advance

Best regards

Re: UPnP MediaRenderer output | discussion

Reply #186
Hi there,

I just downloaded the new beta 1.0beta16.

But the pause-funcionality while streaming to my Yamaha RX-V3067 still doesn't work. Microsoft MediaPlayer is able to pause without any problems.

Also title- and album-information cannot be displayed at the Yammi nor a cover-picture is shown at the connected TV. Using Microsoft MediaPlayer shows all these informations.

Is there any chance to successfully wait for the implementation of these desired features?

Yours

André

Re: UPnP MediaRenderer output | discussion

Reply #187
Peter,

Any chance to have a version in january ?
How can we help ?

Thanks in advance for the work done

Best regards


Re: UPnP MediaRenderer output | discussion

Reply #188
Hi, thanks for the plugin it's a great concept.
But...it is not working for me =)

My Sonos players are not showing up. They show up on my network folder but not in the output list. I enabled the console and I see
"[UPnP] UPnP begin enum devices
[UPnP] UPnP end enum devices" when I open the preferences output page.
I enabled "Search for all UPnP devices", issue persists.

Windows 7 64 bit
Foobar 1.3.16

I'm a programmer so let me know if I can help debug.

Re: UPnP MediaRenderer output | discussion

Reply #189
I have a Raspberry Pi with an Allo Boss DAC (https://www.allo.com/sparky/boss-player.html). It is installed with the Max2play operating sytem. I can see Max2play in the output devices but nothing happens when I try to play a file.

Re: UPnP MediaRenderer output | discussion

Reply #190
Hello

I download the latest version and it works well

Still expect the dynamic title display capability
Any idea when we will have an update with this functionality ?

Thanks in advance

Best regards

Re: UPnP MediaRenderer output | discussion

Reply #191
I just downloaded the new beta 1.0beta17.

But foo's pause-funcionality while streaming to my Yamaha RX-V3067 still doesn't work.

Trying to push foo's pause-button immediately leads to the following error:

-------------------------------------------------------------------------------------
Unrecoverable playback error: UPnP device error: Transition not available
-------------------------------------------------------------------------------------

Yours

André


Re: UPnP MediaRenderer output | discussion

Reply #193
Hello

I'm very satisfied by the plugin and use it for months now.My media renderer is a Denon DRA 100 and it works perfectly

Is there a way to have the stream title to display dynamic information like %title% or %artist% or both ?

In the panel of parameters, only a static value seems to be valid

Thanks in advance for your help.

Great plugin

Hello,

Any possibility to have and answer to this question or an evolution made to the component ?

Thanks in advance

Hello

Any chance to have the dynamic title format to be implemented ?

I would very like it

Thanks in advance

Best regards

Re: UPnP MediaRenderer output | discussion

Reply #194
Hello everyone

Please tell me

My environment:
PC Windows 10 pro 64bit
Foobar 1.3.7
UPnP MediaRenderer output 1.0 beta 17 (foo_out_upnp)
Raspberry Pi 2 B with Volumio 2.348
ES9023 DAC (I2S connection)
STAX headphone Driver and Ear speaker

PC (foobar, foo_out_upnp)> LAN> Raspberry Pi (Volumio)> I2S > ES 9023 DAC> STAX

sound source:
https://www.youtube.com/watch?v=kg4HaZjsHgE
Save downloaded sound file in PC

Playback test:
1, play with foobar, the output is the primary sound driver
2, using foo_out_upnp with foobar to play, output is upnp volumio
3, Play with Volumio (sound source file in PC as NAS)

Other than the test of 1, the equipment after raspberry Pi is the same.
It is the difference whether to play with foobar using foo_out_upnp or Volumio.

result:
1, right and left from PC speaker, normal playback
2, the sound that the left and right were swapped was played from Ear speaker
3, Normal playback from the Ear speaker to the left and right

Only when playing with foobar using foo_out_upnp, it was played with the left and right phases reversed.
I installed Reverse stereo channels with foobar's settings, but I am not using it.

I tested with other sound sources Michael Jackson Thriller:
https://www.youtube.com/watch?v=dLrKCBxdlco

2, walking from the left to the right
3, walk from right to left

Is there anything I should review as a solution to these phenomena?
Thank you


Re: UPnP MediaRenderer output | discussion

Reply #195
Hello everyone

I found out that the problem was with raspberry pi.
It is normal when playing with raspberry pi.
When playing from foobar and using raspberry pi as renderer it became abnormal

After this, I will explore the problem of raspberry pi

Thank you

Re: UPnP MediaRenderer output | discussion

Reply #196
Hello

I'm desesperately waiting forthe dynamic title format to be implemented ?
I would very like it
Anyone like me ?

Thanks in advance

Best regards

 

Re: UPnP MediaRenderer output | discussion

Reply #197
Hello

I still have problems.

When raspberry pi is renderer, left and right sounds are reversed.
This is the result of several people testing.
Problems will occur regardless of software or DAC.

Report of other tests

foobar with UPnP MediaRenderer output> RaspberryPi (Volumio or Rune) = reverse
iTunes with AirPlay> RaspberryPi (Volumio or Rune) = Normal
foobar with UPnP MediaRenderer output> other NMP = normal
Play music files in PC with RspberryPi (NAS) = Normal
Play with foobar (SPDIF) = Normal

Does anyone have the same problem?

My environment:
PC Windows 10 pro 64bit
Foobar 1.3.7
UPnP MediaRenderer output 1.0 beta 17 (foo_out_upnp)
Raspberry Pi 2 B with Volumio 2.348
ES9023 DAC (I2S connection)
STAX headphone Driver and Ear speaker


Re: UPnP MediaRenderer output | discussion

Reply #198
Hello

I'm still waiting for the dynamic title format to be implemented
I would very like it

Any chance of a new version with it ?

Thanks in advance

Best regards

Re: UPnP MediaRenderer output | discussion

Reply #199
Hi,

I am testing foo_out_upnp, 1.0 beta 17. Using an Onkyo TX-NR1007 as the renderer.
I am getting this error:
"Unrecoverable playback error: UPnP device error: Resource not found"

Windows 10's "Cast to Device" functions correctly.

 
SimplePortal 1.0.0 RC1 © 2008-2018