Skip to main content ↑ ↓

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: foo_httpcontrol (Read 941368 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

foo_httpcontrol

Reply #225 –
idk if this is supposed to allow this, but whenever i try and access the ip i supply in the program from another computter, i always get a "Forbidden" page

foo_httpcontrol

Reply #226 –
Quote from: aequasi on
idk if this is supposed to allow this, but whenever i try and access the ip i supply in the program from another computter, i always get a "Forbidden" page
did you set any value to "Remote IP" field in plugin configuration page?

foo_httpcontrol

Reply #228 –
Quote from: aequasi on
Quote from: oblikoamorale on

Quote from: aequasi on

idk if this is supposed to allow this, but whenever i try and access the ip i supply in the program from another computter, i always get a "Forbidden" page
did you set any value to "Remote IP" field in plugin configuration page?

yup, as the outbound ip of the computer

check "Enable logging" in preferences, try to access remotely, and then post screenshot of plugin preferences window and contents of foobar2000 console.
 

foo_httpcontrol

Reply #229 –
http://quasi.schererzoo.com/screenshot.jpg

and yes that is with me trying to remote access, it doesnt show up at all, which leads me to believe its something wrong with vista

foo_httpcontrol

Reply #230 –
Quote from: aequasi on
http://quasi.schererzoo.com/screenshot.jpg
and yes that is with me trying to remote access, it doesnt show up at all, which leads me to believe its something wrong with vista
I think you misunderstood something. your "bind to interface" field equals to "remote ip". why is that? you said you are trying to connect to machine running foobar2000 remotely.

foo_httpcontrol

Reply #231 –
Quote from: oblikoamorale on
Quote from: aequasi on

http://quasi.schererzoo.com/screenshot.jpg
and yes that is with me trying to remote access, it doesnt show up at all, which leads me to believe its something wrong with vista
I think you misunderstood something. your "bind to interface" field equals to "remote ip". why is that? you said you are trying to connect to machine running foobar2000 remotely.

yes i am, so should bind to be local host? and if so, what should remote be?

foo_httpcontrol

Reply #232 –
once again, remote ip defines the one and only ip you're allowing connection _from_.

foo_httpcontrol

Reply #234 –
Quote from: aequasi on
Quote from: oblikoamorale on

once again, remote ip defines the one and only ip you're allowing connection _from_.

http://quasi.schererzoo.com/screenshot.jpg

so technically, if im trying to connect remotely from a computer that has the IP 192.168.1.4, this should work?

no it wont. your http listener service is bound to localhost ip which is unreachable from the remote machine unless you set up the routing
change it to whatever ip has the network card connected with the remote machine (192.168.1.5 iirc judging by your previous screenshot)

ps I hope you are not trolling

foo_httpcontrol

Reply #235 –
Quote from: oblikoamorale on
it has been possible from almost the very beginning with EnqueueDirSubdirs cmd.


Ahh, I stand corrected.  I posted in haste without checking the available commands.  Now to find room for another button on the template...

Quote
may I ask why you didn't go in the way suggested by stock template, where the page is being refreshed only on track changes or in case of insufficient playing track data? requesting data every five seconds might be a bit consumptive batterywise.


I would need to read the track length and set up a timer to request the data at the presumed end of the track.  Certainly doable; I just haven't had time yet.

foo_httpcontrol

Reply #236 –
Quote from: Auric on
Quote from: carmenm on

My problem is that when using your template, the playlist page is not scrollable. I tried with fusion and firefox and it s not scrollable. Maybe it s something you want on iphone but do you know how to change that?

It has to do with how the iPhone handles scrolling.  To restore the scroll bar, open up the CSS file and remove the "overflow: hidden" attribute from the BODY element.

Thanks but i would like my page to be scrollable with mouse wheel but still hide the scrollbar. Is it possible?

foo_httpcontrol

Reply #237 –
Quote from: oblikoamorale on
Quote from: aequasi on

Quote from: oblikoamorale on

once again, remote ip defines the one and only ip you're allowing connection _from_.

http://quasi.schererzoo.com/screenshot.jpg

so technically, if im trying to connect remotely from a computer that has the IP 192.168.1.4, this should work?

no it wont. your http listener service is bound to localhost ip which is unreachable from the remote machine unless you set up the routing
change it to whatever ip has the network card connected with the remote machine (192.168.1.5 iirc judging by your previous screenshot)

ps I hope you are not trolling

ok i got it, thanks, and no im not trolling lol

foo_httpcontrol

Reply #240 –
When any tag is updated, foobar2000 freezes for up to 15 seconds (at least when a large playlist is active, >30000 entrys). 
Can't wait for a HD-AAC encoder :P

foo_httpcontrol

Reply #241 –
Patient: Doctor, it hurts when I do this...
Doctor: Then stop doing it...

foo_httpcontrol

Reply #242 –
If there an option to make http control "read-only"? I want other users in LAN to be able to see what is playing now but I don't want to let them change anything. Is it possible?
Thanks

foo_httpcontrol

Reply #243 –
Oblikoamorale,

I have a couple of questions, I think I already know the answer to the first.

So can your plugin be loaded on a Nokia 770? Assuming the answer is no, then could you recommend any device (or style of device) on which it could be loaded? All that I am looking for is to create a remote whose primary purpose is to control Foobar on my pc - nothing more. A screen the size of the Nokia is sufficient and I would not be wanting to use said device as a phone / pda etc.

A newbie.

foo_httpcontrol

Reply #244 –
Quote from: baltazar on
If there an option to make http control "read-only"? I want other users in LAN to be able to see what is playing now but I don't want to let them change anything. Is it possible?
nope, there is no such option. but you can somewhat simulate one by cutting out all playback control knobs from the template.

Quote from: sondale on
So can your plugin be loaded on a Nokia 770? Assuming the answer is no, then could you recommend any device (or style of device) on which it could be loaded? All that I am looking for is to create a remote whose primary purpose is to control Foobar on my pc - nothing more. A screen the size of the Nokia is sufficient and I would not be wanting to use said device as a phone / pda etc.
and the answer is: I simply don't know. there is a possibility that control page would work fine, but there also is a non-zero chance that nokian browser considers template javascript too hard to swallow. in other words, you wouldn't know until you try. but even if your attempt fails, you can always get rid of all troublesome javascript moments by fiddling with the template.
if you want template to be adopted for your device - send me one and I'll do the dirty work

foo_httpcontrol

Reply #245 –
That is a most generous offer  - I will first try it on the Nokia - just to see - there is nothing to lose!

I am going to have to find out how to quote - so first it is off to the help area!!

foo_httpcontrol

Reply #246 –
Well I tried - but the Nokia does not even see the file never mind use it!! So I will have to try another tack.

Thanks again.

Alan

foo_httpcontrol

Reply #248 –
Are there any clever people here who use the G1 phone? This plugin works perfectly for me - but I wonder if someone would like to design a really beautiful interface that uses the right screen size etc..

The other thing that I'm desperate for is some form of keyword search - I have so much music over so many hard drives and searching works so well on foobar itself..

any hope?

cheers


ooops,
i meant to post this in the
foo_httpcontrol, control foobar via http
thread. Can someone move it for me? thanks!



Quote from: 57hsq on
Are there any clever people here who use the G1 phone? This plugin works perfectly for me - but I wonder if someone would like to design a really beautiful interface that uses the right screen size etc..

The other thing that I'm desperate for is some form of keyword search - I have so much music over so many hard drives and searching works so well on foobar itself..

any hope?

cheers

foo_httpcontrol

Reply #249 –
Quote from: 57hsq on
The other thing that I'm desperate for is some form of keyword search - I have so much music over so many hard drives and searching works so well on foobar itself..

I'd stuck by myself upon the need of simple search yesterday, so I admit, it might be useful.
Code: [Select]
    v0.81 17 Feb
        add: CreateSimpleAutoplaylist command, turning currently active
             playlist into autoplaylist with query pattern specified in param1
             value. Calling it with empty param1 value removes autoplaylist.