Skip to main content ↑ ↓

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: foo_uie_quicksearch (Read 665011 times) previous topic - next topic
0 Members and 2 Guests are viewing this topic.

foo_uie_quicksearch

Reply #126 –
I think I have found out how to reproduce this. It seems as though the searchbox doesn't clear itself.

Type something in the searchbox, double click it to highlight it and try typing something over it.

foo_uie_quicksearch

Reply #127 –
I may sound stupid now, but... how do I dock it?
I assume it is possible since there are mentions of an "undock" feature (and I've seen screenshots showing it docked), but I couldn't dock it in any way I tried...
I'm using foobar2000 v0.9.2 beta 3 and foo_uie_quicksearch 2.0.

Thanks a lot!

foo_uie_quicksearch

Reply #128 –
Great plugin! I've been waiting for 0.9 ever since you made it available for 0.8.

A few things however
- Nowhere to change font in 0.9 version as suggested in the changelog
- pressing Reset to reset Tagz and then hitting Cancel resets them anyway
- if search string is wider than the the actual panel and you keep typing, the text doesn't shift to the left as it normally would with any other textbox. Try in any small textbox to get the idea.
- would be nice to see the text align in the middle of the panel. Right now it sticks to the top. Not sure whether it's a design flaw or just left to be done later.

I'm on XP SP2.

If those things were already mentioned, please don't yell.

foo_uie_quicksearch

Reply #129 –
Been eyeing this for awhile. Keep up the good work, Nemo and thanks for the port.
f to c to f to c

foo_uie_quicksearch

Reply #130 –
Quote from: Fiend Angelical on
I think I have found out how to reproduce this. It seems as though the searchbox doesn't clear itself.

Type something in the searchbox, double click it to highlight it and try typing something over it.

tried to reproduced it hear with 2.0 but still no bug. It must have to do with something else than the plugin:)

foo_uie_quicksearch

Reply #131 –
Quote from: carmenm on
Quote from: Fiend Angelical on

I think I have found out how to reproduce this. It seems as though the searchbox doesn't clear itself.

Type something in the searchbox, double click it to highlight it and try typing something over it.

tried to reproduced it hear with 2.0 but still no bug. It must have to do with something else than the plugin:)

Hmm. What might it be then?

foo_uie_quicksearch

Reply #132 –
Quote from: Fiend Angelical on
I think I have found out how to reproduce this. It seems as though the searchbox doesn't clear itself.

Type something in the searchbox, double click it to highlight it and try typing something over it.

I have the same problem, also delete and backspace doesn't clear the characters.

foo_uie_quicksearch

Reply #133 –
OK, regarding the overwriting problem on typing a couple of characters, the text turns bold, almost as if the box has rewritten itself without clearing initially (though if I try to delete the characters before they turn bold they will still not delete so I'm assuming that the problem occurs after the second key press).

I've tried removing components to see if the problem was there, but no luck, perhaps it has to do with chipset, I'm using an Athlon FX-51 (essentially an AMD 64),  on my other computer, which is a non 64 bit processor (but still an Athlon), the problem does not occur on either 0.9.1 or 0.9.2, perhaps the 64 bit could be a contributing factor (though I'm pretty sure I'm clutching at straws)?  The Foobars are set up in exactly the same way.

foo_uie_quicksearch

Reply #134 –
Quote from: frankthechicken on
I've tried removing components to see if the problem was there, but no luck, perhaps it has to do with chipset, I'm using an Athlon FX-51 (essentially an AMD 64),  on my other computer, which is a non 64 bit processor (but still an Athlon), the problem does not occur on either 0.9.1 or 0.9.2, perhaps the 64 bit could be a contributing factor (though I'm pretty sure I'm clutching at straws)?  The Foobars are set up in exactly the same way.

I have AthlonXP with KT600 chipset, and the same...

foo_uie_quicksearch

Reply #135 –
Quote from: Peti on
Quote from: frankthechicken on

I've tried removing components to see if the problem was there, but no luck, perhaps it has to do with chipset, I'm using an Athlon FX-51 (essentially an AMD 64),  on my other computer, which is a non 64 bit processor (but still an Athlon), the problem does not occur on either 0.9.1 or 0.9.2, perhaps the 64 bit could be a contributing factor (though I'm pretty sure I'm clutching at straws)?  The Foobars are set up in exactly the same way.

I have AthlonXP with KT600 chipset, and the same...

I have an AMD 64 with no problem. But i must point out that i have a 32 bit winXP

foo_uie_quicksearch

Reply #136 –
Mine's a AMD Duron 1800 KT333 chipset (ancient), if that helps.

foo_uie_quicksearch

Reply #137 –
Quote from: wolver1ne on
- pressing Reset to reset Tagz and then hitting Cancel resets them anyway

Version 2.1 will fix this issue. Please redownlaod from first post.
Note : Users of version 2.0 should manually remove the dll from their foobar components directory before installing any new version. [Valid dll's should be named foo_uie_quicksearch.dll , not foo_uie_quicksearch V.x.dll ... my bad.]
Thanks.

foo_uie_quicksearch

Reply #138 –
Thanks! This plugin is great!

foo_uie_quicksearch

Reply #139 –
Quote from: Dan Hibiki on
I may sound stupid now, but... how do I dock it?
I assume it is possible since there are mentions of an "undock" feature (and I've seen screenshots showing it docked), but I couldn't dock it in any way I tried...
I'm using foobar2000 v0.9.2 beta 3 and foo_uie_quicksearch 2.0.

Thanks a lot!

Good question!

foo_uie_quicksearch

Reply #140 –
Feature Request.
Could there be an option to auto focus the search result playlist after successful search.

foo_uie_quicksearch

Reply #141 –
Quote from: Dan Hibiki on
I may sound stupid now, but... how do I dock it?
I assume it is possible since there are mentions of an "undock" feature (and I've seen screenshots showing it docked), but I couldn't dock it in any way I tried...
I'm using foobar2000 v0.9.2 beta 3 and foo_uie_quicksearch 2.0.

Thanks a lot!


Okay, discovered myself: I was using an outdated version of Columns UI, I updated it and now it's fine 

foo_uie_quicksearch

Reply #142 –
great plugin. keep up the good work

foo_uie_quicksearch

Reply #143 –
Hello all !

Great plugin indeed, nice work Nemo !

I'm having the same problem frankthechicken and others have reported concerning the non-clearing of the search box. I'm using foobar 0.91 with the latest Columns UI (0.1.3 beta 1v5). Windows XP SP2 Fr on a HP NC6120 Laptop (Intel 915GM)...

Hope this can help (?) and keep up the good work!!!

EDIT: Using Quicksearch 2.1 btw

foo_uie_quicksearch

Reply #144 –
Same problem here, non-clearing of the searchbox.

Using foobar 0.91, Columns UI 0.1.3 beta 1v5 and Quicksearch 2.1 (AMD palermo, windows xp sp2)


p.s) It clears when check 'Reset search string when successful' in Preferences.

but if not checked (by default), characters starts overlapping.

foo_uie_quicksearch

Reply #145 –
!!! Urgent !!!

please someone tell me how i can configure quick search to display in a playlist i create instead of making a new one with the search text i typed in. Pretty much i want it to go to a playlsit that says Search Results instead of "Search Results Jimi Hendirx Axis Bold As Love"

Thank you.

foo_uie_quicksearch

Reply #146 –
Quote from: bsommer on
!!! Urgent !!!

please someone tell me how i can configure quick search to display in a playlist i create instead of making a new one with the search text i typed in. Pretty much i want it to go to a playlsit that says Search Results instead of "Search Results Jimi Hendirx Axis Bold As Love"

Thank you.


go to Preferences - Search Results and History - Target Playlist

and fill it with 'Search Results'

and check off 'Append search string to playlist name'

foo_uie_quicksearch

Reply #147 –
[a href="http://img139.imageshack.us/my.php?image=fd8dz.jpg" target="_blank"]
 

foo_uie_quicksearch

Reply #149 –
Great Plugin so far, but here's a feature request: can you add an option for simply playing the first matching item instead of putting all matching items into a new playlist?

Thanks!