Skip to main content

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: EAC Could not detect a valid read mode for this drive (Read 477 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

EAC Could not detect a valid read mode for this drive

It all of sudden stop working. How do I fix it for my Pioneer BDR-XD07UHD USB DVD/Blu-Ray Burner Drive ?

Re: EAC Could not detect a valid read mode for this drive

Reply #1
Given your post history here, I would suggest a check with Malwarebytes first.
Then you might have hardware or driver issues. That could be your computer's USB in, or it could be your drive.

Update drivers for drive and mobo USB. Try to check for new firmware, even. (That's double-edged: if you just did update drivers/firmware, you could have gotten something buggy.)

A USB drive is easy to bring to another computer if you have access to one. Try it there. Kinda, hope it is the drive, as it is less expensive than a computer.
High Voltage socket-nose-avatar

Re: EAC Could not detect a valid read mode for this drive

Reply #2
Given your post history here, I would suggest a check with Malwarebytes first.
Then you might have hardware or driver issues. That could be your computer's USB in, or it could be your drive.

Update drivers for drive and mobo USB. Try to check for new firmware, even. (That's double-edged: if you just did update drivers/firmware, you could have gotten something buggy.)

A USB drive is easy to bring to another computer if you have access to one. Try it there. Kinda, hope it is the drive, as it is less expensive than a computer.

I messed it up using Pioneer's BDDrive utility. I reset it to factory defaults and now it works again.

 
SimplePortal 1.0.0 RC1 © 2008-2021