Skip to main content
Recent Posts
General - (fb2k) / Re: Any easy way to load foobar on startup to the system tray?
Last post by Patti12 -
Reviving an old thread as I have the same exact problem as OP. I have my foobar setup as a media server with foo_upnp plugin and want foobar to open as minimized to tray on Windows startup so my AV receiver can find the media server whenever my PC is on. I know how to make foobar open normally on startup but it's annoying to manually minimize it to tray whenever I start my PC.
Actually i figured this out.
What I'm asking seems to be possible, would've been nice if OP would've disclosed how he figured it out...  ::)
General Audio / Re: Is it all bull**** now?
Last post by greynol -
Enjoyment is the name of the game. I'm still happy with my Yamaha RX-460 and Paradigm 3seMk3 speakers, as well as other speakers that I (in my mind) have positioned carefully.  Never felt the need to go beyond the bass, treble, mid-cut, and the other crucial tone control: volume. I can make the system sound good to me at any level I consider reasonable for the situation.  How did we ever get by without room correction?  Yeah, yeah, something like the picture I posted earlier, I know.  Oh, that and bass traps. ;)

I also have an RX-770 and a pair of AR9s (Hi-Res Series), but I don't have an appropriate room to put them in.   I also had a pair of AR S20s that I really liked.

Do I have tin ears?  Dunno, but I was told that I was one of the best critical listeners at the time when I worked for Dolby Labs.
General Audio / Re: Is it all bull**** now?
Last post by BrilliantBob -
The expensive sound systems don't repair the damaged ears of the olders.

For an average sound amateur like me, a cheap $120 speakers eg. Microlab M-910 are good enough for my PC in my room. With a tested audible range of 10Hz-14,000 Hz ( samples), these speakers cover the ATH of any so called "audiophile" aged >50. Someone wrote here the people aged >50 rarely can hear sounds >10,000 Hz and I trust him. The 10 Hz and 14,000 Hz samples seems to be more like vibrations and perceptions than sounds. I think these expensive and sophisticated sound systems (others than the snake oil pretty devices) are good only for some extra surround effects wich make people think they got the God's ears.
General - (fb2k) / Re: New to Foobar2000
Last post by Clando57 -
I've tried Picard and foo_discogs. Even if they both retrieve some informations, none satisfy me. Picard doesn't find any information about composers and Discogs doesn't fill them in accurately. As said above, I was really not looking for a plugin that would give approximative results, I wanted to do that perfectly by myself.

Indeed, Columns UI lets me do what I want. Thank you !
General Audio / Re: Downsampling Vinyl-Rips to CD
Last post by Rollin -
dither_method: Why shibata? What are advantages and disadvantages of the others?
shibata moves dither noise from most audible range to high frequencies. You can see difference between dither/noise shaping algorithms here -

precision: What does it do? More precisions means bigger file size? And according to FFmpeg Resampler Documentation a value of 28 gives SoX’s ’Very High Quality’, so 28 is max or not? Why a value of 33?
Quality of resampling algorithm. It not affects file size directly. 28 is not max. 33 is max. But, yes, 33 is overkill.

Also, notice, that sometimes resampling can result in audible clicks between tracks -,114960.msg947760.html#msg947760 I don't know if this can be avoided with ffmpeg, but this can be avoided with foobar2000.
Audio Hardware / Re: Help me build my first serious music (stereo) system
Last post by bdunham7 -
1) Do you have a carpet in the room? No carpet. But there is another smaller room that is carpeted that I could move my music system to.
2) Have you run the Audyssey room correction? Yes, and it does seem to help a little.
3) If so, do you have the option of viewing the results in a menu (it will look like a sort of rough EQ graph) and No, my AVR doesn't seem to have this option...
4) Do you use the Audyssey, Audyssey Flat, L/R Bypass or Off settings? (if you have them) Just Audyssey
5) To the extent you can tell, is the harshness in the upper-midbass region 150-250 Hz or midrange 1-2Khz?  Or elsewhere? Highs
6) Does it change if you get up and walk around, sit on the floor, etc? I don't know as I usually don't walk around while listening.
7) Lastly (for today), how old are you and do you have any hearing problems (tinnitus, etc) or are you exposed to loud noise?
Mid 30s, no hearing issues other than my ears are very sensitive - hence I prefer to listen to music at low to mid volumes :-)

OK, first, I want to be clear that I'm not an audio engineer or professional acoustician or anything like that.  I certainly wouldn't want you to buy expensive equipment or remodel your house on advice from me!  However, I've solved similar issues on my own -- a perception of poor sound quality from a system -- and the solutions usually surprised me a bit.  Some of those solutions would have been nearly impossible to find by trial and error, but others I discovered accidentally--or mistakenly.  So I'll ask questions and give you suggestions.

1) First suggestion--you need to have some way of evaluating the frequency response of  your system at the listening point.  You said you don't see an Audyssey results menu, but could you look again?  On my similar (Marantz) AVR, you would go into the setup menu, then "Speakers", then "Audyssey Setup", then "Check Results" and finally "Equalizers".  Also, you use a PC attached to the system, right?  Go to and, bookmark those pages and have a look at them.  There's no need to get to sophisticated right now, but see if you can try the tone sweeps and see if there are spots that sound harsh to you, or have sharp dips or peaks in volume.

2) Second suggestion--check your ears.  This is a common insult among the audiophool crowd, but the reality is that anyone my age (mid-50s) that thinks their ears are still golden is either delusional or exceptional.  Exceptionally delusional, that is.  Between military service and too much Van Halen, my ears are a bit ragged and roll off over 8kHz.  At 10kHz and up I can't hear anything at any volume below painful.  However, while that isn't a really a problem, certain midrange frequencies will sound like broken glass in a garbage disposal if they go over a certain volume.  Your statement that you avoid loud volumes because your ears are sensitive leads me to think  you may have a similar issue.  So you can see what it is that your ears are sensitive to by running the tone sweep tests at the links I provided.  Run them at a volume somewhat higher than your normal listening level to find your upper hearing limit and see if any points sound exceptionally harsh.  If  you find a point that irritates your ears, recruit a test subject to listen and see if they hear the same harshness.

3) Last suggestion for today--reflections.  I wouldn't move the system to a different room, but you might try throwing a rug or pillows or something on the floor in front of them, between your chair and the speakers.  Your room is odd-shaped, so it may be difficult to evaluate for reflections, but if there are hard surfaces that will reflect sound directly back to the listening position (a "first" reflection), this may cause a perception of harshness.   I would also try moving the speakers around a bit, just to see if things change a lot or not.  For example, I think Klipsch recommends pointing the horns directly at the listening position.  You can try that and then toeing them out a bit at a time to see what changes.  If there are radical changes with each repositioning , reflections may be an issue.

You aren't the only person I've heard observe that the lower line of Klipsch seem "harsh", so there may be new speakers in your future.  I would just suggest that you use what you currently have to learn as much as you can.  I cringe to think what an audiophoolish hi-fi salesman might try to sell you given your concerns and your budget.
General - (fb2k) / Re: New to Foobar2000
Last post by Sergey77 -
In addition to above, I'm not sure which of the Playlist Viewers you can use lets you edit metadata inline (without opening a dialog) - anyone? I believe you can do this with Columns UI - NG Playlist.
Anamorphic: you're right, there is the feature "Linked meta field (for inline editing)" in Columns UI.
SimplePortal 1.0.0 RC1 © 2008-2018