Skip to main content

Recent Posts

1
General - (fb2k) / Re: New HDD and Mass lossless conversion
Last post by Porcus -
How can I find those 4 track pairs in that huge text log ?

What do you find at the end of the log?

For text files this big, Notepad++ is your friend.
2
Support - (fb2k) / Re: Unknown error code (0x887D0003)
Last post by Wammbo -
Ok i reinstall my realtek audio driver to latest version it fixed for me the problem please close thread. thx for the help.
3
These forums are for the desktop version only.
You need to be here.
4
One more example -- slightly less processing.   There might be too much processing for some ears on the original 'restored' version, so I backed off about 30% of the processing in this example.   Note that I still don't have 100% of the surging fixed again -- I have retuned for NR a bit better, and so getting the higher level dynamics tuned to the 'ear' is important.  Need to decide if I need to make the depth of fast (and linear) expansion faster, make the slow (dB/dB) expansion slower or faster or what other combination.  It sounds to me like the hold time is a little too long -- but the tradeoff is LF distortion.  There are so darned many tradeoffs that it can be very UNFUN to work on this stuff!!!  So, below is a version of the demo with less expansion.  (I dropped the expansion from 1:1.60 to 1:1.40 to give an idea as to the difference.)   I didn't change any timeconstants (which are pretty much fixed anyway -- but appear to need to be retuned because of the vast amount of NR enabled.)
5
I have put the 4 band aside for now -- pretty much latest sources reside on the repository.   I found out (by some experiments) that the 'large scale' processor can usually do 90% of what the 4 band can do -- but also MUCH MUCH MORE.   Frankly, in some of my experiments, the noise reduction capability (due to some uncommon algorithms) SEEMS TO GO far beyond a normal expander.  In the same way the 'large scale' APPEARS to do a pretty good (if not amazing) job of dynamic range expansion for transients.   I did learn some limitations of the transient expansion mechanism -- should have realized from the math -- so I had to only allow enable/disable rather than tuning it.  (The transient expansion tends to fit hand-in-glove with the original compression that damaged the music and the normal expansion mechanisms in the expander section of the processor.)   I still plan to give out binaries and a little later source code -- but there is A LOT more work than the simple 4 band.   Because this new processor is so very aggressive -- it even has the ability to recompress and relimit if too much expansion is requested.   The tunables are too numerous right now, and I need to do some work on that.   Here are some short examples (before/after.)  The original version is converted directly from the source copy used to produce the 'after' version.  There was no special tuning in this case, but the expander was set to a more aggressive mode.   The most recent work on the expander has been to further refine the NR capabilites, which I estimate at approx 10-12dB (with an 18dB maximum NR.)  This is NOT your average audio processor!!!   Attached are the shortened examples...
6
Thanks for your tip unfortunately that one is continued.
I looked at other products on their site, but none of them mention the cable type so there is no way to know.

I don't really need a workout solution, I have the JLab Epic2 (wireless) for that, which is the absolute best in its class. Perhaps only beaten by JLab Air (fully wireless).

Eventually I have decided to give up and focused on other things like weight, comfort, cable material, microphone, remote with buttons to take/end calls and skip tracks + volume and play/pause.

My search (spending hours and multiple days) lead me to:
1. BeyerDynamic Byron (€47) - for every day use and work (making phone calls) and short business trips. Heavy use means risk of loosing or damaging them. These ones are not that expensive so I can take risks with them.
2. 1More Triple Driver - more expensive (€88) but amazing built and sound quality. Still lightweight. I will use them to enjoy music or a movie. But I won't use them often, keeping it exclusive.

I do not regret my choices, the BeyerDynamic Byron has its mic/remote on the left side, exactly what I was used to with Y cable inears. The fit is perfect and sound quality very good. The 1More clearly a step up, you hear it immediately.
7
3rd Party Plugins - (fb2k) / Re: foo_scrobble
Last post by TheQwertiest -
I've added a new release that allows skipping tracks based on a titleformat script and adds a mainmenu command to toggle scrobbling.
Thanks!
8
General - (fb2k) / Re: New HDD and Mass lossless conversion
Last post by Case -
Hopefully the log gets more helptul and gathers all problems into easy to find location. The dll lists at least these strings for non-matching situations:
Access denied
Audio data format mismatch
Compared tracks contain apparent errors reported by the decoder; use File Integrity Verifier component to get more information.
Comparing failed
Decoder produced no data
Decoder returned invalid data
Differences found
Invalid audio data format
Invalid data returned
Neither track could be opened for decoding
Non-zero offset detected in     Zero offset detected.   Zero offset detected in
Object is not seekable
Operation aborted, results are incomplete.
Premature EOF in referenced audio file at
Problematic files:
Sample format change in mid stream
Seek offset out of range
There were problems reported
Unsupported format or corrupted file
compared track pairs contain apparent errors reported by the decoder; use File Integrity Verifier component to get more information.
could not be opened for decoding
length mismatch
non-identical track pairs.
track pairs could not be compared.
9
Thank you so much!  That worked perfectly.  I should RTFM more closely.   :B
10
The function $meta() bypasses all mappings. Use $meta(album artist).