Skip to main content ↑ ↓

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: Information about Unitra Fonica Mf-104 cartridge needed (Read 7596 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Information about Unitra Fonica Mf-104 cartridge needed

Does any of you have information about the Unitra Fonica Mf-104 cartridge? I found some sites with Google, but most of them are in Polish and I don't understand a word.

Information about Unitra Fonica Mf-104 cartridge needed

Reply #2 –
Me be pole, what you want know?

Information about Unitra Fonica Mf-104 cartridge needed

Reply #3 –
Some info:

freq. range: 20-21,500 Hz
channel separation > 25 dB at 1000 Hz
separation accuracy <= -1 dB at 1000 Hz
load impedance 47 kOhm / 400 pF
tracking force range: 12-17 mN (15 mN - recommended)
needle: diamond, spheric, 0.015 mm, effective mass 0.8 mg
total mass: 7g

Information about Unitra Fonica Mf-104 cartridge needed

Reply #6 –
I guess that Messer provided all the info.
Allegro.pl is an auction portal - something like ebay - what you see there is a magnetic insert with needle, said to be new, unused, and in original packaging. Parameters are similar to those listed by Messer. 65zł = ~17 euro.
The second link is some forum where they whine about high prices.

Information about Unitra Fonica Mf-104 cartridge needed

Reply #7 –
If it takes a 47k load then it's definitely MM.