Skip to main content
Terms of Service
Topic: shibatch eq...
(Read 14196 times)
0 Members and 1 Guest are viewing this topic.
Joined: 01 October, 2001
11 September, 2002, 07:19:29 PM
I just measured some real world cd players pre-ringing on an impulse signal:
cd player Denon DCD 2560: pre and post ringing of 0.5 ms.
CD/MP3 player Soul DMP-01 (=Rio Volt SP100=iRiver IMP100): not symmetrical ringing, pre-ringing of 0.3 ms, post-ringing of 2 ms.
These durations of pre-ringing are quite under the 2 ms zone of backwards temporal masking, so they are not audible, not to mention other reasons explained before of why cd brickwall filter ringing is not audible.
Joined: 29 September, 2001
12 September, 2002, 03:01:20 AM
... and what would be your estimate of the amount of pre- and post- ringing in the Shibatch EQ?
powered by ElkArte 1.0.10
SimplePortal 2.4 © 2008-2014