Gaps and CD-Rom Drives
Reply #2 – 2002-07-08 16:35:07
Originally posted by Xenion I think CD players only display a gap if they get the information from the CD that there <IS> a gap. why can't EAC detect it that way ?!? the only explanation I have is that cd rom drives can't read gaps. (only detect because of a silence/ peak level 0) The gab informations are stored in the TOC, if the TOC is correct (I think it's pretty common to use wrong TOC information for copy protection) then EAC should place the (pre-)gaps correctly. If you have Feurio! installed, just check the helpfile for very useful hints about index, index0, etc.... If you haven't installed it here's the most importanat section about that subject, unfortunately just in german (but shouldn't be a problem for you i guess). Sorry, but i haven't installed the englisch part!Feurio Fragen & Antworten - Begriffserklärung: Indizies Eine CD ist (wie sicher jedem bekannt) in mehrere Tracks eingeteilt. Ein Track wiederum kann in mehrere Indizes eingeteilt werden. Die Track-Indizes beginnen mit 0 oder 1 und können bis zu 99 gehen. Die Track-Indizes (außer Index 0 und 1) werden aber heutzutage kaum noch verwendet. Bei z.B. einigen Klassikaufnahmen werden einzelne Sätze innerhalb eines Stückes mit Indexmarken “markiert”. Einige CD-Player können Indizes direkt anspringen. Eine besondere Rolle spielt der Index 0. Index 0 enthält normalerweise Stille und stellt die Pause zwischen den Tracks dar. Auf der CD wird im CD-Inhaltsverzeichnis (der “Table of Contents) die Startposition jedes Tracks gespeichert; allerdings wird hier die Position vom Index 1 angegeben. Dies hat zur Folge, dass bei der direkten Anwahl eines Titel der Index 0 übersprungen wird! (Der CD-Spieler beginnt direkt mit Index 1) Der Index 0 (und damit die Index-0-Stille) wird also NUR bei einem kontinuierlichen Abspielen der CD ausgegeben! Manche CD-Spieler erlauben sogar das Überspringen der Index-0-Stille. Praktisch alle CD-Spieler geben daher Index 1 eines Tracks als Position 0 aus, der Index-0-Bereich wird in der Regel durch negative Werte angezeigt. (Der Feurio!® CD-Player arbeitet genauso) Ab Index 1 folgen dann die “normalen” Samples des Tracks. Für besondere Anwendungen kann aber auch der Index-0 Bereich mit Musikdaten beschrieben werden - siehe “Index-0-Musik”. aus: Feurio CD-Writer Online-Hilfe © by Fangmeier Systemprogrammierung
Those who desire to give up freedom in order to gain security, will not have, nor do they deserve, either one! (Benjamin Franklin)