Skip to main content ↑ ↓

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: foo_vis_vumeter (Read 94657 times) previous topic - next topic
0 Members and 9 Guests are viewing this topic.

Re: foo_vis_vumeter 0.9.5.0 Crashes FB 2.1.4.1 X64

Reply #375 –
reference: Reply #368

Try disabling milkdrop2 and ProjectM.

Also be sure your processor doesn't fall into the range cited by oops' post about full DX12 compatibility--if it does, get the working Intel driver here:  https://www.intel.com/content/www/us/en/support/articles/000057520/graphics.html

Continue to post in the foo_vis_vumeter thread for support.

BTW, the Foobar section has its own Uploads thread: https://hydrogenaud.io/index.php/board,42.0.html

Re: foo_vis_vumeter

Reply #376 –
Thanks oops.  Yep, "using a single instance of VU Meter in DUI on x64 in light mode" is me also  ;D .  I'm at .91 currently with absolutely no issues;  will be interested to see what this was about before taking the leap.

Re: foo_vis_vumeter 0.9.5.0 Crashes FB 2.1.4.1 X64

Reply #377 –
still crashes after disabling Project M and Milkdrop also when I go back to v9.0 still crashes

Re: foo_vis_vumeter 0.9.5.0 Crashes FB 2.1.4.1 X64

Reply #378 –
Quote from: marktherob2005 on
still crashes after disabling Project M and Milkdrop also when I go back to v9.0 still crashes
I just updated my reply above, check about the processor version and the Intel DX12 driver.

Re: foo_vis_vumeter 0.9.5.0 Crashes FB 2.1.4.1 X64

Reply #379 –
there were no issues at 9.0 the errors came after 9.0 i will check into reinstalling dx12

Re: foo_vis_vumeter

Reply #381 –
Quote from: sveakul on
Thanks oops.  Yep, "using a single instance of VU Meter in DUI on x64 in light mode" is me also  ;D .  I'm at .91 currently with absolutely no issues;  will be interested to see what this was about before taking the leap.
This is a weird one. The settings structure does not get initialized at all! Not even the default values, just zeros all around. In fact, I'm surprised it got through as far as it did. The statement that finally threw the exception was the empty font face for the FPS text. The FPS font defaults to Calibri.

Side note: C++ exceptions throw with the E06D7363h error code when built with MSVC.

From running a working configuration, the initialization should be hit right after this message is printed in the console:
[204ms] foobar2000 v2.24.1 x64 [standard]

Something is weird in the setup or fundamentally broken. I don't know where.

First try to make sure the download is uncorrupted. Compare the hash of your download with the source I used to upload (e.g., in PowerShell):
(Get-FileHash -Path .\Downloads\foo_vis_vumeter-0.9.5.fb2k-component -Algorithm SHA256).Hash -eq 'bcf9cb6cd17c622e55d2c72eb43249b369ad8eb91868378061eda95bae13fb57'

Then try reinstalling the component.

Another option is to do a portable install and then just run with the VU Meter component (besides the default components). I tested this just now and it works as expected.

Lastly, if you feel brave (and I have no idea if this would even work), the GUID for this component is 0A8B8B7A-2E90-43BB-B395-EB41A124F7E2. You can go into the configuration store and clear the "ui.elem.GUID.*" and the "vumeter.*" entries.

For now this is what I could come up with. Sorry.

Re: foo_vis_vumeter 0.9.5.0 Crashes FB 2.1.4.1 X64

Reply #384 –
downloaded file

Re: foo_vis_vumeter

Reply #385 –
I'm going to try later.

Uninstall Foobar completely then reinstall with just vumeter without any other plugins. see how this goes. or do without vumeter it was nice while it worked but not absolutely necessary. 
 

Re: foo_vis_vumeter 0.9.5.0 Crashes FB 2.1.4.1 X64

Reply #386 –
Quote from: sveakul on
Try what oops suggests here:  https://hydrogenaud.io/index.php/topic,126733.msg1058134.html#msg1058134

Are you running the update from the auto-updater or doing an install from downloaded file?

I am going to attempt to remove  foo_vis_vumeter 0.9.5.0 from my system completely as it was updated over top of a previous release. 9.2 Then I will attempt to install it from scratch. Could some kind person tell me what keys in the registry that I need to find to remove it better still a .reg file to run to remove it. 

Re: foo_vis_vumeter 0.9.5.0 Crashes FB 2.1.4.1 X64

Reply #387 –
Quote from: marktherob2005 on
Quote from: sveakul on
Try what oops suggests here:  https://hydrogenaud.io/index.php/topic,126733.msg1058134.html#msg1058134

Are you running the update from the auto-updater or doing an install from downloaded file?

I am going to attempt to remove  foo_vis_vumeter 0.9.5.0 from my system completely as it was updated over top of a previous release. 9.2 Then I will attempt to install it from scratch. Could some kind person tell me what keys in the registry that I need to find to remove it better still a .reg file to run to remove it. 
Read the other thread a couple of posts ago by oops. And stay in that thread please.


Moderator: Merged topics

Re: foo_vis_vumeter 0.9.5.0 Crashes FB 2.1.4.1 X64

Reply #388 –
Quote from: Defender on
Quote from: marktherob2005 on
Quote from: sveakul on
Try what oops suggests here:  https://hydrogenaud.io/index.php/topic,126733.msg1058134.html#msg1058134

Are you running the update from the auto-updater or doing an install from downloaded file?

I am going to attempt to remove  foo_vis_vumeter 0.9.5.0 from my system completely as it was updated over top of a previous release. 9.2 Then I will attempt to install it from scratch. Could some kind person tell me what keys in the registry that I need to find to remove it better still a .reg file to run to remove it. 
Read the other thread a couple of posts ago by oops. And stay in that thread please.


Moderator: Merged topics
I did a reset on configuration and than re-installed foo_vis_vumeter 0.9.5.0 all is normal again just have to re-install my plugins that I need thanks for all your help.

Re: foo_vis_vumeter 0.9.5.0 Crashes FB 2.1.4.1 X64

Reply #389 –
Quote from: marktherob2005 on
Quote from: Defender on
Quote from: marktherob2005 on
Quote from: sveakul on
Try what oops suggests here:  https://hydrogenaud.io/index.php/topic,126733.msg1058134.html#msg1058134

Are you running the update from the auto-updater or doing an install from downloaded file?

I am going to attempt to remove  foo_vis_vumeter 0.9.5.0 from my system completely as it was updated over top of a previous release. 9.2 Then I will attempt to install it from scratch. Could some kind person tell me what keys in the registry that I need to find to remove it better still a .reg file to run to remove it. 
Read the other thread a couple of posts ago by oops. And stay in that thread please.


Moderator: Merged topics
I did a reset on configuration and than re-installed foo_vis_vumeter 0.9.5.0 all is normal again just have to re-install my plugins that I need thanks for all your help.

Here is a update: foo_vis_vumeter 0.9.5.0  works great until I introduce SACD and DVDAudio plugins when it crashes. Have to do a reset to recreate crash reports and dumps


Re: foo_vis_vumeter 0.9.5.0 Crashes FB 2.1.4.1 X64

Reply #390 –
Quote from: marktherob2005 on
Quote from: marktherob2005 on
Quote from: Defender on
Quote from: marktherob2005 on
Quote from: sveakul on
Try what oops suggests here:  https://hydrogenaud.io/index.php/topic,126733.msg1058134.html#msg1058134

Are you running the update from the auto-updater or doing an install from downloaded file?

I am going to attempt to remove  foo_vis_vumeter 0.9.5.0 from my system completely as it was updated over top of a previous release. 9.2 Then I will attempt to install it from scratch. Could some kind person tell me what keys in the registry that I need to find to remove it better still a .reg file to run to remove it. 
Read the other thread a couple of posts ago by oops. And stay in that thread please.


Moderator: Merged topics
I did a reset on configuration and than re-installed foo_vis_vumeter 0.9.5.0 all is normal again just have to re-install my plugins that I need thanks for all your help.

Here is a update: foo_vis_vumeter 0.9.5.0  works great until I introduce SACD and DVDAudio plugins when it crashes. Have to do a reset to recreate crash reports and dumps
These crash reports are with only SACD plugin installed. I can't do any more on this for a few hours. Just want to keep u updated

Re: foo_vis_vumeter

Reply #391 –
Quote from: marktherob2005 on
Quote from: marktherob2005 on
Quote from: marktherob2005 on
Quote from: Defender on
Quote from: marktherob2005 on
Quote from: sveakul on
Try what oops suggests here:  https://hydrogenaud.io/index.php/topic,126733.msg1058134.html#msg1058134

Are you running the update from the auto-updater or doing an install from downloaded file?

I am going to attempt to remove  foo_vis_vumeter 0.9.5.0 from my system completely as it was updated over top of a previous release. 9.2 Then I will attempt to install it from scratch. Could some kind person tell me what keys in the registry that I need to find to remove it better still a .reg file to run to remove it. 
Read the other thread a couple of posts ago by oops. And stay in that thread please.


Moderator: Merged topics
I did a reset on configuration and than re-installed foo_vis_vumeter 0.9.5.0 all is normal again just have to re-install my plugins that I need thanks for all your help.

Here is a update: foo_vis_vumeter 0.9.5.0  works great until I introduce SACD and DVDAudio plugins when it crashes. Have to do a reset to recreate crash reports and dumps
These crash reports are with only SACD plugin installed. I can't do any more on this for a few hours. Just want to keep u updated
DVDA does not seem to be installed.
What happens when you install foo_input_sacd 1.5.17?

Re: foo_vis_vumeter

Reply #392 –
@marktherob2005

Do you use BitDefender? If so, remove it.
Also, since the Audio Device does not support DSD, please delete foo_input_sacd.
Since foo_out_asio+dsd is not installed, Native playback is not possible. There is no point.
SHURE SRH1840, SENNHEISER HD660S2, SENNHEISER HD620S, SENNHEISER HD 490 Pro Plus, beyerdynamic DT 1990 PRO, HiFiMAN Edition XS, Bowers & Wilkins P7, FiiO FT5, 水月雨 (MOONDROP) 空鳴 - VOID, Nakamichi Elite FIVE ANC, SONY WH1000XM5 (made a Upgrade/Balanced Cable by myself)

Re: foo_vis_vumeter

Reply #393 –
Quote from: Air KEN on
Also, since the Audio Device does not support DSD, please delete foo_input_sacd.
Since foo_out_asio+dsd is not installed, Native playback is not possible. There is no point.
Eh?

My audio device does not support DSD. Foo_input_sacd is perfectly capable to output PCM from DSD source.

Re: foo_vis_vumeter

Reply #394 –
Yes, of course I know. It's in the settings.
What is it?
This is a separate issue so let's leave it at that.
SHURE SRH1840, SENNHEISER HD660S2, SENNHEISER HD620S, SENNHEISER HD 490 Pro Plus, beyerdynamic DT 1990 PRO, HiFiMAN Edition XS, Bowers & Wilkins P7, FiiO FT5, 水月雨 (MOONDROP) 空鳴 - VOID, Nakamichi Elite FIVE ANC, SONY WH1000XM5 (made a Upgrade/Balanced Cable by myself)

Re: foo_vis_vumeter

Reply #395 –
@ Defender my foobar crashed after a couple of reinstall i remember you sent me your vu folder and all is back to normal so thank you

Re: foo_vis_vumeter

Reply #396 –
Quote from: Air KEN on
Yes, of course I know. It's in the settings.
What is it?
This is a separate issue so let's leave it at that.
What are you on?

He has a stable running VU  0.9.5.0 on a fresh foobar. The moment he installs a slightly older foo_input_sacd it starts crashing.

And your advice is this:
Also, since the Audio Device does not support DSD, please delete foo_input_sacd.

What kind of help is that?

Re: foo_vis_vumeter

Reply #397 –
when I reinstall the vu   meter folder was empty so I used you're

Re: foo_vis_vumeter

Reply #398 –
@Defender
Don't use anything unnecessary.
Also, FxSound Audio Enhancer seems suspicious.
If you are using FxSound Audio Enhancer and are having trouble, you will often see the answer "Delete FxSound Audio Enhancer".
SHURE SRH1840, SENNHEISER HD660S2, SENNHEISER HD620S, SENNHEISER HD 490 Pro Plus, beyerdynamic DT 1990 PRO, HiFiMAN Edition XS, Bowers & Wilkins P7, FiiO FT5, 水月雨 (MOONDROP) 空鳴 - VOID, Nakamichi Elite FIVE ANC, SONY WH1000XM5 (made a Upgrade/Balanced Cable by myself)

Re: foo_vis_vumeter

Reply #399 –
@AIR KEN

This was all working fine before 9.5 came along. I pay and need Bitfefender and also need SACD so you tell me to delete them. Sorry I can't I use them all the time.

This was working with all this software before I updated to 9.5 how will it help to delete all this software. If that's the case I will forgo using VUMETER