Re: Keeping 128-level quality
Reply #16 – 2023-03-23 06:47:54
I have a slew of lossily compressed, non-mp3 files on my device that I want to transcode to MP3. I have read that transcoding between lossy formats, but my car device only accepts MP3. Some of the files I have are from games, some are from ripped CDs, a variety of different sources. Because of this, some of them are .aac, others .m4a, .ogg, .opus, and perhaps even others. What they all have in common is the bitrate, 128 kbps. My sole question: If I transcode these files to 320 kbps (Or even V0) MP3, will the resulting files still manage to sound as good or better than if they were originally 128 MP3s to start with? I just want to make sure they will sound at least as good as 128 kbps .mp3 files. I think I get what you are saying here... -Example A) Lossless(FLAC etc) to MP3 @ V5 (130kbps). -Example B) Opus/AAC etc @ 128kbps (or so) converted to MP3 @ V5 (or whatever bit rate is sufficient for decent sound quality). you are basically asking whether the sound quality of 'Example B' will be 'at least' as good as 'Example A' or thereabouts. I would say most likely 'yes' overall assuming your current lossy files are of more than high enough sound quality to start with, which chances are they are, especially given you are playing them on a typical car stereo as I figure when just sitting back enjoying the music I would not expect to be able to hear any obvious sound quality drop offs. p.s. chances are you won't need 320kbps or anything close to this for car stereo usage as I would try V5 (130kbps) or not much higher than this as chances are that will be good enough and is efficient to.